World Library  
Flag as Inappropriate
Email this Article

Torx

Article Id: WHEBN0000452992
Reproduction Date:

Title: Torx  
Author: World Heritage Encyclopedia
Language: English
Subject: Hex key, Screw, ISO 3166, List of International Organization for Standardization standards, Torque screwdriver
Collection: Screws
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Torx

A Torx T8 screw on a hard disk drive.

Torx (pronounced ), developed in 1967[1] by Camcar

  1. ^ a b c U.S. Patent 3,584,667 filed 1967-03-21
  2. ^ Camcar eventually became part of Textron Fastening Systems in the 1990s. In 2006 Textron Fastening Systems was sold to Platinum Equities, LLC, of Beverly Hills, California. They renamed the company Acument Global Technologies, which as of 2010 includes Avdel, Camcar, Ring Screw, and others. In 2014, Acument was sold from Platinum Equity to Fontana Gruppo (http://www.platinumequity.com/news/907/platinum-equity-sells-acument-to-fontana-gruppo).
  3. ^
  4. ^
  5. ^ a b c d
  6. ^ a b http://web.archive.org/web/20070102194628/http://www.textronfasteningsystems.com/PDFs/torx.pdf
  7. ^ http://www.jeepwatches.co.uk/images/handtools/AE44.jpg
  8. ^
  9. ^
  10. ^ http://www.etoolsrus.com/browse.cfm/4,5120.html
  11. ^
  12. ^
  13. ^
  14. ^
  15. ^ http://www.wihatools.com/Marketing/torxspec.htm
  16. ^ a b http://www.acument.com/pdfs/Catalog_TORX_PLUS_DS.pdf
  17. ^ http://www.wihatools.com/300seri/366_IP_serie.htm
  18. ^
  19. ^ http://www.acument.com/pdfs/Catalog_Fastening_Solutions.pdf
  20. ^ http://web.archive.org/web/20061110014752/http://www.textronfasteningsystems.com/PDFs/TP_tech/Tampresisttorxplus.pdf
  21. ^ http://www.lasertools.co.uk/item.aspx?cat=1246&item=748
  22. ^ http://www.wihatools.com/700seri/716_IPR_serie.htm

References

See also

Gallery

AW, similar type of screw head developed by the Würth group in Germany.

TTAP, which is also hexalobular, is designed to minimize wobbling without the need for magnetic bits, a feature that can be important to certain industrial users. Standard Torx drivers can be used to drive TTAP screws, but TTAP drivers will not fit standard Torx screws.

Competitive variants

  • A Torx successor, Torx Plus, was introduced about 1990 when the original Torx patent was expiring. The lobes are more square to allow for higher torque and to minimize wear. The name is shortened to IP (Internal Plus) with sizes ranging from 1IP to 100IP [16] (sometimes listed as IP1 to IP100 [17]) and EP (External Plus) with sizes ranging from 1EP to 42EP as well as smaller sizes ranging from H7EP to H2EP and includes five-lobed tamper-resistant variants.[16] The specifications for these licenses are held by Textron. Standard Torx drivers can be used to drive Torx Plus screws, but not to full torque because of the loose fit. Torx Plus drivers will not fit into standard Torx screws.
  • A tamper-resistant version of Torx Plus exists having five lobes rather than six, plus a solid post in the center, and is used for security as the drivers are uncommon.[18] Though Acument (formerly Textron) lists no designation,[19][20] TS [21] or IPR [22] may be seen.
Properties of various External Torx drives
Size   Point-to-point distance [15]    Standard fastener selection [6] 
(in) (mm) (SAE) (metric)
E4 0.15 3.8 #6 M3
E5 0.18 4.7 #8 M4
E6 0.22 5.6 #10 M5
E7 0.24 6.1
E8 0.29 7.4 1/4" M6 & M7
E10 0.36 9.3 5/16" M8
E12 0.43 11.1 3/8" M10 & M11
E14 0.50 12.8 7/16" M12
E16 0.57 14.7 1/2"
E18 0.65 16.6 9/16" M14
E20 0.72 18.4 5/8" M16
E24 0.87 22.1 3/4" M18 & M20
E28 7/8" M22
E32 1" M24 & M27
E36 1-1/8" M30
E40 1-1/4" M33
E44 1-3/8" M36
  • A version known as Security Torx, Tamper-Resistant Torx (often shortened to Torx TR) or pin-in Torx contains a post in the center of the head that prevents a standard Torx driver (or a straight screwdriver) from being inserted.
  • An External Torx version exists, where the screw head has the shape of a Torx screwdriver bit, and a Torx socket is used to drive it. The external “E” Torx nominal sizing does not correlate to the “T” size, (e.g. an E40 socket is too large to fit a T40, while E8 Torx socket will fit a T40 Torx bit [5]).
External Torx driver
Security Torx driver

Variants

Properties of various Torx drives[5]
Size  Point-to-point distance   Maximum torque range  ~ E Torx
(in) (mm) (lb•ft) (N•m)
T1 0.031 0.81 0.01 – 0.02 0.02 – 0.03
T2 0.036 0.93 0.05 – 0.07 0.07 – 0.09
T3 0.046 1.10 0.10 – 0.13 0.14 – 0.18
T4 0.050 1.28 0.16 – 0.21 0.22 – 0.28
T5 0.055 1.42 0.32 – 0.38 0.43 – 0.51 E2
T5.5[7][8][9]
T6 0.066 1.70 0.55 – 0.66 0.75 – 0.90
T7 0.078 1.99 1.0 – 1.3 1.4 – 1.7
T8 0.090 2.31 1.6 – 1.9 2.2 – 2.6
T9 0.098 2.50 2.1 – 2.5 2.8 – 3.4
T10 0.107 2.74 2.7 – 3.3 3.7 – 4.5
T15 0.128 3.27 4.7 – 5.7 6.4 – 7.7
T20 0.151 3.86 7.74 – 9.37 10.5 – 12.7 E4
T25 0.173 4.43 11.7 – 14.0 15.9 – 19 E5
T27 0.195 4.99 16.6 – 19.8 22.5 – 26.9
T30 0.216 5.52 22.9 – 27.6 31.1 – 37.4 E6
T35[10][11][12]
T40 0.260 6.65 39.9 – 48.0 54.1 – 65.1 E8
T45 0.306 7.82 63.4 – 76.1 86 – 103.2
T47[13][14] GM-Style
T50 0.346 8.83 97.4 – 117 132 – 158 E10
T55 0.440 11.22 161 – 189 218 – 256 E12
T60 0.519 13.25 280 – 328 379 – 445 E16
T70 0.610 15.51 465 – 516 630 – 700 E18
T80 0.690 17.54 696 – 773 943 – 1048 E20
T90 0.784 19.92 984 – 1094 1334 – 1483
T100 0.871 22.13 1359 – 1511 1843 – 2048 E24

The "external" variants of Torx head sizes (see below) are described using the capital letter "E" followed by a number ranging from E4 to E44.[6] The "E" numbers are different from the "T" numbers of the same size: for example, an E4 Torx socket fits a T20 head.[5]

Torx head sizes are described using the capital letter "T" followed by a number ranging from T1 to T100.[5] A smaller number corresponds to a smaller point-to-point dimension of the screw head (diameter of circle circumscribed on the cross-section of the tip of the screw driver). Common sizes include T10, T15, and T25, while T5.5, T35, and T47 tend to see specialized use. Only the proper driver can drive a specific head size without risk of damaging the driver or screw. The same series of Torx drivers is used to drive SAE, metric and other thread system fasteners, reducing the number of bit sizes required.

Part of a series on
Screw drive types
Slot
Phillips
PH
Pozidriv (SupaDriv)
PZ
Square
Robertson
Hex
12-point flange
Hex socket (Allen)
Security hex socket (pin-in-hex-socket)
Torx
T & TX
Security Torx
TR
Tri-Wing
Torq-set
Spanner head
(Snake-eye)
TH
Clutch
A & G
One-way
Double-square
Triple square
XZN
Polydrive
Spline drive
Double hex
Bristol
Pentalobe

Sizing

The green circle, passing through the six points of contact between the two components, represents the direction of the rotational force being exerted at each of those points. Because the plane of contact is not perpendicular to this circle, a radial force is also generated which tends to "burst" the female component and "crush" the male one. If this radial force component is too great for the material to withstand, it will cause the corners to be rounded off one or both components or will split the sides of the female part. The magnitude of this force is proportional to the cotangent of the angle (depicted in orange) between the green circle and the contact plane. It can be seen that for the Torx type of design, the angle is much closer to 90 degrees than in the case of the hex head, and so for a given torque the potentially damaging radial force is much lower. This property allows the head of the fastener to be smaller for the same required torque, which can be an advantage in applications where space to accommodate the head is limited.

The Torx design allows for a higher torque to be exerted than a similarly sized conventional hex socket head without damaging the head and/or the tool.[1] The diagram on the right depicts the interaction between the male and female components of a conventional hex drive and a Torx drive. The clearance between the components is exaggerated for clarity. The diagram does not show a true Torx profile, but illustrates the general shape and geometry.

By design, Torx head screws resist cam-out better than Phillips head or slot head screws.[1] Where Phillips heads were designed to cause the driver to cam out, to prevent overtightening, Torx heads were designed to prevent cam-out. The development of better torque-limiting automatic screwdrivers for use in factories allowed this change. Rather than rely on the tool to slip out of the screw head when a torque level is reached, which risks damage to the driver tip, screw head, and/or workpiece, torque-limiting driver designs achieve a desired torque consistently. The manufacturer claims that this combination can increase tool bit life by ten times or more.

The angle between the plane of contact between tool and fastener and the circumferentially directed force is much closer to 90 degrees in a Torx type of head (lower) than in a conventional hex head (upper).

Principles of operation

Contents

  • Principles of operation 1
  • Sizing 2
  • Variants 3
  • Competitive variants 4
  • Gallery 5
  • See also 6
  • References 7

Torx screws are commonly found on automobiles, motorcycles, bicycle brake systems (disc brakes), hard disk drives, computer systems and consumer electronics. Initially, they were sometimes used in applications requiring tamper resistance, since the drive systems and screwdrivers were not widely available; as drivers became more common, tamper-resistant variants, as described below, were developed.[4] Torx screws are also becoming increasingly popular in construction industries.

is an improved head profile. Torx Plus (starting with numeral "6", not a capital "G"). 6lobe This is sometimes abbreviated in databases and catalogs as [3]

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.